How Much Does a 6-Foot Privacy Fence Cost in Dallas-Fort Worth?

If you’re asking, “How much does a 6-foot privacy fence cost in Dallas-Fort Worth?” you’re in the right place. I’ll walk you through realistic local price ranges, what changes the cost, sample estimates for typical yards, permitting and HOA notes, and smart questions to ask before you sign any contract. Everything below reflects our experience installing fences across the DFW metroplex and the local pricing guidance we researched from other trusted local sources.

Quick answer (short version)

Expect to pay roughly $30 to $60 per linear foot for a standard 6-foot wood privacy fence in the Dallas-Fort Worth area for every day, professionally installed jobs. Lower-end projects can fall below if you choose pressure-treated pine and very basic installation; higher-end cedar, custom board-on-board profiles, specialty posts, gates, or difficult terrain push the price higher. For many homeowners, a 100-foot run will land somewhere between about $2,500 and $6,000 depending on materials and extras.

Why prices vary so much (the short list)

When a neighbor paid $50/ft and another paid $25/ft, both might be telling the truth they just had different materials, site conditions, and scopes. The major cost drivers are:

• Material (pressure-treated pine vs. cedar vs. exotic hardwood vs. vinyl/composite). Cedar costs more than pine but lasts longer and looks better. Vinyl and composite have different price bands.
• Fence style (side-by-side pickets, board-on-board, tongue-and-groove, horizontal, capped and trimmed). More complicated styles take more labor and more boards.
• Labor & local rates experienced crews and quality installers charge more, but they also dig correct post holes, set posts in concrete when needed, and do better cleanup.
• Site conditions slopes, rocky soil, roots, or the need to remove an old fence can add significant cost.
• Gates and extras gate hardware, staining, concrete footers, metal posts, decorative caps, and HOA or city requirements all add up.

Local Dallas-Fort Worth price bands (realistic ranges)

Based on our pricing and what top local resources report is, you can use these local ranges as a planning guide:

• Budget pressure-treated pine, 6-ft, simple side-by-side: roughly $15–$30 per linear foot installed (very basic).
• Mid-range cedar, 6-ft, common privacy profile: roughly $30–$60 per linear foot This is a common range for homeowners who want a durable, attractive fence.
• Premium cedar or custom board-on-board / tongue-and-groove, 6-ft: roughly $60–$90+ per linear foot depending on posts, metal reinforcement, gates, and finish. Some specialty projects or heavy-duty designs can exceed this.

You’ll also see some contractors advertise very low rates per foot. Those prices are often for very basic materials, DIY panels, or they exclude typical costs like permit fees, gate hardware, staining, or substantial site prep. Always ask what’s included.

Example estimates

These are ballpark examples to help you visualize costs. All assume professional installation and standard site conditions (no major rock, no old fence removal).

1. Small yard 60 linear feet (backyard only)
   1. Budget pine: 60 × $18 = $1,080
   2. Mid-range cedar: 60 × $45 = $2,700
   3. Premium cedar/custom: 60 × $75 = $4,500
2. Average suburban lot 120 linear feet (full backyard + side)
   1. Budget pine: 120 × $18 = $2,160
   2. Mid-range cedar: 120 × $45 = $5,400
   3. Premium cedar/custom: 120 × $75 = $9,000
3. Larger property 200 linear feet
   1. Mid-range cedar at $40/ft = $8,000 (gates, staining, posts extra)

These examples intentionally show ranges your exact price will depend on gate count (each gate is typically a few hundred dollars), hardware quality, and whether you want staining/sealing included.

Permits, codes, and HOAs in Dallas-Fort Worth

Before any work, check local city rules and HOA covenants. In the DFW area:

• Many cities require permits for fences over certain heights (for example, over 4 ft in front yards or over 6 ft in backyards in some jurisdictions). Permit fees in the area commonly range from about $50 to $150, depending on the city.
• HOAs often have design review processes they may dictate materials, finished sides, colors, and picket spacing. Getting HOA approval can add time before we start.

We always help customers check permit needs and typical city fees as part of our estimate it saves headaches later.

Timeline how long does installation take?

For most straightforward 6-foot privacy fences, a standard professional crew can typically install about 30–60 linear feet per day depending on terrain and crew size. A 100-foot fence often completes in 2–3 days, assuming no special challenges. If we need to remove an old fence, deal with large trees, or drill through rock, that adds time.

Durability and maintenance (what to expect down the road)

• Pressure-treated pine: lowest upfront cost but will weather and may need replacement or heavy repair sooner (8–12 years depending on climate and maintenance).
• Cedar: naturally rot-resistant and the most popular mid-range choice in DFW with staining and maintenance, a cedar fence can last 15+ years.
• Vinyl / composite: low maintenance and long life, but higher upfront cost; color and panel options vary. National retail and big-box sources show vinyl as a pricier per-foot option in some cases.

Staining or sealing every 2–4 years protects wood and preserves appearance. We always recommend factoring maintenance into lifetime cost estimates.

Gate pricing and extras

Gates are often overlooked but important. A single standard wooden gate usually costs several hundred dollars to install, with premium hardware or double gates raising that amount. Metal posts, specialty caps, concrete footers, or decorative trim all add to the per-foot price. If you want electrical access control, decorative iron accents, or reinforced posts for livestock or heavy winds, expect those to increase the project total.

How to avoid sticker shock money-saving tips

1. Plan the route carefully shorter runs cost less. If you can move plantings or gates slightly to reduce linear footage, it helps.
2. Share the cost with your neighbor Texas law allows cost sharing on mutual boundary fences, splitting a 100-ft fence halves your out-of-pocket cost.
3. Choose a mid-range cedar instead of exotic hardwood big difference in upfront cost for near-comparable longevity.
4. Get multiple quotes but compare apples to apples ask what’s included: post depth, concrete, gate hardware, clean-up, staining, and permit handling. Low bids often exclude critical items.
5. Do prep work yourself if practical removing a few small shrubs or light debris can reduce labor time. (Leave stump and root removal to pros they can be costly if tackled incorrectly.

Questions you should ask any fence contractor

When you get quotes, ask the contractor to put these items in writing:

• What is the exact per-linear-foot price and what does it include? (posts, concrete, cleanup?)
• How deep will posts be set and will they be set in concrete? (We typically set posts to frost- and wind-resistant depths for long life.)
• Are permits and HOA paperwork included or the owner’s responsibility?
• What brand/type of wood or materials will be used (and will you provide samples)?
• What warranty do you provide for workmanship and materials, and what does it cover?
• When do you expect to start and finish the job? (Get dates in writing.)

Why hire a professional (and when DIY makes sense)

We love DIYers but installing a privacy fence sounds simple until you get to set posts in uneven clay soil or deal with a property line dispute. A professionally installed fence is usually stronger, more durable, and comes with a warranty. If you’re handy and have the right tools, a very small run (panels and posts) can be a DIY option but always check your city/HOA rules and get the lines surveyed if there’s any doubt about ownership.

How we price jobs at DFW Fence Contractor (what to expect from us)

When you request a free estimate from us, we:

1. Visit the site (or accept detailed photos) and measure the proposed fence line.
2. Inspect site conditions (slope, roots, existing fencing).
3. Confirm the type and grade of materials you want (pine, cedar grade, post size, hardware).
4. Include permit fees and HOA paperwork handling if needed (we’ll tell you which city permits apply).
5. Produce a line-item estimate that shows cost per linear foot and any extra costs for gates, staining, or rock removal.

We want you to be able to compare our quote with other bids using the same checklist, so you don’t get surprised.

Final thoughts. Planning your 6-foot privacy fence in DFW

“How Much Does a 6-Foot Privacy Fence Cost in Dallas-Fort Worth?” has a simple short answer and a longer, more useful one. Short answer: plan on roughly $30–$60 per linear foot for a typical, well-installed cedar privacy fence and adjust up or down for materials, gates, and site conditions. Longer answer read your estimate carefully, ask about permit handling, and budget for staining and minor maintenance, those choices have a big impact on long-term value and how often you’ll need repairs.

If you want, we’ll come out for a free on-site estimate and show you examples of cedar and pine we use, discuss gate options, and walk you through permit requirements for your specific city inside the DFW area. We’re DFW Fence Contractor we install fences designed to last in North Texas weather, and we stand behind our work.